AlarmAgent

AlarmAgent™ is triple-redundant for a constant connection and a fail-safe performance.

• Analog signal types used with the AlarmAgent and how to configure each type
• How to Restore SMS Service for Text Message Notification
• AlarmAgent battery service life
• How do I activate my AlarmAgent account?
• Analog Flowmeter
• AlarmAgent -- CSA -- Managing Notification Groups
• How many Flow-meters can we monitor on an Alarm Agent
• How many pulses can the alarm agent do per second on a flow-meter
• What type of antenna / antenna cable connector do I need for my alarm agent.
• Manual control of output relays
• Dimensions of the AlarmAgent WRTU NEMA 4X with solar option enclosure
• What is the AlarmAgent's analog inputs resistance?
• AlarmAgent -- Signal Strength Zero Bars
• AlarmAgent -- WRTU -- Choosing a Location for the WRTU and Antenna
• AlarmAgent -- Event Logs
• Can I move my AlarmAgent to a new location?
• AlarmAgent -- Receiving and acknowledging alarm notifications
• AlarmAgent Environmental Requirements
• Do I leave the unit powered on when I leave to set up the unit on the AlarmAgent web site?
• How is GPM computed?
• AlarmAgent RTU Power Requirements
• What cellular carriers do the AlarmAgent.com WRTU use?
• AlarmAgent -- System Dashboard
• AlarmAgent Dimensions
• What is Comm-Check?
• Increasing the signal strength AlarmAgent WRTU
• AlarmAgent -- Exporting Data From Report
• Notes about Pump Alarms
• Delays in communications between the web site and the AlarmAgent WRTU
• What do I use in areas not covered by the Digital map?
• How does pump alarm sensitivity relate to pump alarms?
• Over the Air Firmware Updates
• Free AlarmAgent System Review
• User Access to the AlarmAgent web site
• Who is the cellular provider, providing my service to my AlarmAgent WRTU?
• Recent Events section of the System Dashboard
• AlarmAgent Field Troubleshooting Guide 2019
• Why is the web site reporting that my WRTU battery is discharging?
• Troubleshooting AA GPM
• RTU Data Storage Capacity
• My AlarmAgent will not power up / turn on
• AlarmAgent -- LEDs changing color / blinking
• Dimensions of the AlarmAgent WRTU NEMA 4X enclosure
• Alarm Agent Specificatons
• Where can I download the Alarm Agent CSA Manual?
• I am unable to connect to the AlarmAgent.com web site what should I do?
• AlarmAgent -- Printing Report
• Alarm Agent RTU Coverage Map
• Notification Groups and Sequences - Blasting Mode
• Disconnecting the Battery Alarm Agent
• When I order an AlarmAgent WRTU - what's in the box?
• AlarmAgent -- CSA -- RTU Configuration Page
• AlarmAgent -- CSA -- Getting Started
• AlarmAgent -- CSA -- Report Configuration
• AlarmAgent -- CSA -- Application Templates
• AlarmAgent -- CSA --alarm configuration
• AlarmAgent -- CSA -- Configuring RTUs
• AlarmAgent -- CSA -- RTU Commands and the Command Queue
• AlarmAgent -- CSA -- Role of Customer System Administrators
• CSA role and definition (Customer Service Administrator)
• AlarmAgent -- CSA -- Manage Users -- Adding a User
• AlarmAgent -- CSA -- Manage Notification Sequences
• AlarmAgent -- CSA -- Importing RTUs into the System
• AlarmAgent -- CSA -- System Wide Settings
• AlarmAgent -- CSA -- OFFLINE and ONLINE Status
• User does not have an email address
• AlarmAgent -- Notification Email not Appearing in My Inbox
• AlarmAgent -- What is suspension and how can I clear it?
• AlarmAgent -- Shutting down the unit properly
• Connection Issues Troubleshooting Flowchart
• AlarmAgent -- CSA -- RTU Command Queue
• Can you discuss the new Realtime feature and how it works?
• How do I connect a Remote Arm/Disarm Switch Module?
• Enclosure Drawings and Dimensions
• Firmware revisions and the enhancements / fixes contained in each release.
• What are the roles of the installer, operator, CSA, and FSA?
• AlarmAgent -- CSA -- Analog Scaling Configuration
• Wiring the AlarmAgent to get a high high and a low low alarm
• What are the AlarmAgent Wireless RTU Field Equipment Requirements?
• AlarmAgent - Does the jumper configure both analog channels or just 1 for 1 - 5 VDC ?
• Getting the AlarmAgent to read a 0 - 10 VDC analog signal. How do I scale it?
• Antennas and 3G Sunset
• CDMA and GSM Network Sunsets
• SMS Message Content
• AlarmAgent -- Unexpected Return To Normal (RTN) notifications
• AlarmAgent Board Exchange Diagram
• AlarmAgent LTE Upgrade
• Power cycling the AlarmAgent
• Checking AlarmAgent radio lights
• All the lights on an AlarmAgent solar unit are flashing after the battery jumper was moved
• I just plugged in the AlarmAgent unit and I only have two little power lights
• How long can I run my sensor wire?
• Does the AlarmAgent supply the 4 - 20 ma loop power?
• Watchdog Alarms and Template Reports
• Why am I getting Watchdog alarms every single day?
• What is a Watchdog alarm?
• What does the ordinal number do on the Manage Users page?
• AlarmAgent -- CSA -- Manage Group Membership
• AlarmAgent -- RTU Status page
• AlarmAgent -- Blink rates and LED color changes for Transmit LED
• Why are my GPM readings zero?
• FSA role and definition (Financial System Administrator)
• I am not getting emails from AlarmAgent. What's causing this?
• Minimum Operational Voltage of the AlarmAgent Battery
• Countries Eligible to Receive Alarm Notifications
• Why analog inputs have negative values
• Configuring a Physical Input Channel to read from a 4-20mA Transducer
• Alarm Agent Antenna Mounting Instructions